Select Form Bracket - Heavy-Duty Concrete Edge Form Bracket

Select Form Brackets 44/caseBack to product index

The Select Form Bracket by Nox-Crete is a Heavy-Duty Concrete Edge Form Bracket for Tilt-Wall and Tilt-Up construction.

A superior alternative to site or yard fabricated lumber blocks.

SOLD IN CASES
44 BRACKETS / CASE


Note: Choose Options to Buy Online

Additional Details

The Select Form Bracket by Nox-Crete is a Heavy-Duty Concrete Edge Form Bracket for Tilt-Wall and Tilt-Up construction.  The 7” x 9” Select Form Brackets are a superior alternative to site or yard-fabricated lumber blocks. The product offers maximum reusability, and when stacked, requires a fraction of the shipping and storage space.

Select Form Brackets can be glued to avoid damage to the concrete casting slab/floor with preferred sealant-type adhesive compatible with green concrete with consistent results, which is certainly not the case with dry versus wet lumber. The brackets can also be mechanically fastened using the four preformed holes on each leg of the bracket. The total contact surface area for gluing/fastening is essentially identical to 2 x 4 lumber. The versatile design allows for the use of the 7” leg on 7” to 9” edge forms and the 9” leg on 9” to 13” edge forms. Maximum center-to-center spacing with 2 x lumber edge forms is 36”.

Key Advantages:

• Lower cost
• Greater reuse capability
• More consistent glue adhesion
• Will not leave difficult to remove and unsightly tannin stains
• Stackable, requiring a fraction ofthe space for transport and storage
• Will not crack, warp, twist, or rot
• Recyclable

Packaging:

• 44 Brackets per Case
• Box measures 23.2” x 20.9” x 10.4”
• Gross weight is 38.6 lbs

Contact Nox-Crete or your local Nox-Crete Distributor and request the Nox-Crete Select Form Brackets by name!

Resource Downloads

Additional Documents
Select Form Bracket - Sell Sheet